Stepper motor controller shield

If you need to control some stepper motors for a 3d printer or a CNC machine, you need a stepper motor driver. Usually, these come with parallel port connectivity and if you don’t have a parallel port on your PC or you want to drive your CNC machine from a Raspberry Pi, then you have the choice of either using a USB to parallel adapter, or you can use a microcontroller.

A friend purchased a chinese stepper driver based on the TB6560 and needed a way to run the steppers from an arduino, so I made a shield for this purpose.

 

 

The design is made in Eagle using the pinout information of the stepper driver from this website.

You can download the schematic and board here.

Advertisements
Stepper motor controller shield

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s