First Youtube Video Published! Also, 3d printed lcd pcb enclosure!

Okay, so I published my first Youtube video. I was really nervous while filming and I may have made one or two mistakes in editing and filming. So please, comment on the video to help me improve!

I needed to see what I’m filming while I’m doing it and a 7″ LCD left over from another project came in handy. The problem is that the enclosure was long gone and I also wanted to mount it on a small tripod.

This is what the final product looks like. I’m using a Li-po to power it, maybe not such a good idea but it was available.

DSC_2404

Besides the usual measure once print twice issues, in editing I heard a hum or buzz when I powered on the LCD, maybe someone knows what that’s about so please comment.

Check out the video here.

  • Parts printed in ABS
  • Layer height 0.3mm
  • Raft settings: 0.2mm air gap; Surface layers: 1; Extra margin: 4mm
  • Slicer: CuraEngine
  • Host: RepetierHost
Advertisements
First Youtube Video Published! Also, 3d printed lcd pcb enclosure!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s